Yamaha YSP-5600 Owners Manual - Page 13
Example for installing the unit, PREPARATIONS, Installation
View all Yamaha YSP-5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
123456 Example for installing the unit This unit outputs sound beam as shown in the illustrations below. Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. If the unit is installed so that it is parallel to a wall, install it as close to the exact center of the wall as possible. If the unit is installed in a corner of a room, position it at a 40-50° angle to the adjacent walls. Parallel installation: Viewed from above Viewed from the side Objects, such as furniture Sound beams are reflected off the ceiling Parallel installation Install this unit as close to the exact center of the wall as possible. • If the unit cannot be installed evenly between the left and right walls, sound beams can be adjusted to achieve natural surround sound effects (p. 16). Ideal installation condition Install this unit as close to the exact front of your normal listening position as possible. The distance between listening position and the unit should be more than 1.8 m (6 ft). Sound beam output varies depending upon the 3D surround/Surround setting (p. 37, 38) and the channel output setting (p. 72). The illustration above shows the path of sound beams when 3D surround is enabled and "Front" in the Channel Out setting is set to "Beam". Corner installation: Viewed from above Viewed from the side 40° to 50° Sound beams are reflected off the ceiling Objects, such as furniture The illustrations above show the path of sound beams when 3D surround is enabled (p. 37) and "Front" in the Channel Out setting is set to "Stereo". (p. 72). More than 1.8 m (6 ft) More than 1.8 m (6 ft) PREPARATIONS ➤ a Installation En 13