Yamaha YSP-5600 Owners Manual - Page 40
-channel playback (stereo playback mode)
![]() |
View all Yamaha YSP-5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2-channel playback (stereo playback mode) 2-channel stereo playback using the right front and left front channels is enabled. When multi-channel audio signals are input, they are down-mixed to 2 channels. 1 Press the STEREO key to switch to stereo playback mode. For clear sound at a distance / 3D SURROUND SURROUND STEREO TARGET Delivering sound to a specified location (target playback mode) Target playback mode outputs sound beams from a single channel for optimal listening from a specific position. Refer to the illustrations below. For listening at low volumes, such as at night Play an input source, and adjust the beam angle. 1 Press the TARGET key. 2 Use the W/X key to adjust beam angle. The angle to the left increases by 2 degrees each time the W key is pressed; the angle to the right increases by 2 degrees each time the X key is pressed. A maximum angle of 90 degrees in either direction is possible. Beam angle adjusted 16 degrees to the left TARGET L16 Disabling target playback mode Press the 3D SURROUND key, SURROUND key, or STEREO key to turn target playback mode off. • The CINEMA DSP programs are not enabled in target playback mode. • Bass output is controlled to prevent sounds from spreading in other directions. PLAYBACK ➤ Enjoying sound based on your preference En 40
![](/manual_guide/products/yamaha-ysp5600-owners-manual-7c42ad2/40.png)