Yamaha YSP-5600 Owners Manual - Page 16
Adjusting sound beams to achieve optimal surround, sound effects, Installing the stands
View all Yamaha YSP-5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
123456 Adjusting sound beams to achieve optimal surround sound effects This unit's AUTO SETUP (p. 29) can be used to automatically adjust sound beams to achieve the optimal surround playback environment according to the listening room setup. In addition to using AUTO SETUP, sound beams can be adjusted manually to achieve surround sound effects best suited to the listening room setup when the unit is installed as described below. Installing the unit near a corner of the room When installing the unit near a corner of the room as shown in the illustration below, front channel sound may seem to come from an unnatural direction if beam settings are configured using AUTO SETUP. Should this occur, adjust the left and right front channels using "Image Location" (p. 71) in the setup menu to achieve more natural sound. When left front channel sound is unnatural Left front channel adjusted Installing the stands Install the stands (supplied) on the bottom of the unit. Align and insert the protrusion on the stands into the holes on the rear panel of the unit as shown in the illustration, and then tighten the screws (supplied) to lock the stands in place. The stands need not be installed when the unit is mounted on a wall using the optional Wall Mount Bracket SPM-K30. Stand (supplied) Installing the unit in an irregularly shaped room When the unit is installed in a room that is not rectangular, sound beams may not be properly reflected off the walls as shown in the illustration below. Should this occur, perform AUTO SETUP, and then adjust the angle of beam from the channel from which sound is not properly heard using "Horizontal Angle" (p. 69) in the setup menu to achieve even distribution of sound. Screws (supplied) Stand (supplied) PREPARATIONS ➤ a Installation En 16