Yamaha YSP-5600 Owners Manual - Page 31
Press the ENTER key to start the AUTO SETUP, procedure and then leave the room within 10, seconds.
![]() |
View all Yamaha YSP-5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SYSTEM MEMORY 4 Press the ENTER key to start the AUTO SETUP procedure and then leave the room within 10 seconds. AUTO SETUP START Will begin in 10 sec. Please leave the room. ---------- [RETURN]:Cancel The screen changes automatically as measurement progresses. ENTER RETURN ( ) SHOW RESULT MEASUREMENT COMPLETE. ENVIRONMENT CHECK:Success FRONT :Beam SURROUND :Beam SUBWOOFER:Wired [ENTER]:Save set-up. [RETURN]:Do not save set-up. If the AUTO SETUP procedure is complete, this unit rings the chimes. • The AUTO SETUP procedure takes about 3 minutes. • To cancel the AUTO SETUP procedure after it is started, or if you do not want to apply the results, press the RETURN ( ) key. • If an error occurs, an error buzzer sounds and an error message is displayed. For details on error messages, see "If an error message is displayed" (p. 33). 5 Press the ENTER key. The measurement results are applied and saved in the unit. AUTO SETUP COMPLETE Please remove the MIC from Sound Projector and the listening position. Press [SYSTEM MEMORY] key to save set-up in the memory. • You can save several measurement results by pressing the SYSTEM MEMORY 1, 2, or 3 key. When the SYSTEM MEMORY 1 key is pressed, "M1 Saving" is displayed, and settings are saved. • If ambient noise is picked up after measurement begins, an error message is displayed in the "AUTO SETUP COMPLETE" screen prompting you to begin measurement again. Press the ENTER key to exit the error message screen, and begin measurement again. • See page 44 for more information on the system memory function. PREPARATIONS ➤ f Initial settings En 31
![](/manual_guide/products/yamaha-ysp5600-owners-manual-7c42ad2/31.png)