ZyXEL ES-315 User Guide - Page 81
MVR Group Configuration, Group Configuration
View all ZyXEL ES-315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 13 Multicast Table 24 Advanced Application > Multicast > Multicast Setting > MVR (continued) LABEL DESCRIPTION None Select this option to set the port not to participate in MVR. No MVR multicast traffic is sent or received on this port. Tagging Select this checkbox if you want the port to tag the VLAN ID in all outgoing frames transmitted. Add Click Add to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Cancel Click Cancel to begin configuring this screen afresh. VLAN This field displays the multicast VLAN ID. Active This field displays whether the multicast group is enabled or not. Name This field displays the descriptive name for this setting. Mode This field displays the MVR mode. Source Port This field displays the source port number(s). Receiver Port This field displays the receiver port number(s). 802.1p This field displays the priority level. Delete To delete a multicast VLAN(s), select the rule(s) that you want to remove in the Delete column, then click the Delete button. Cancel Click Cancel to clear the Delete check boxes. 13.7 MVR Group Configuration All source ports and receiver ports belonging to a multicast group can receive multicast data sent to this multicast group. Configure MVR IP multicast group address(es) in the Group Configuration screen. Click Group Configuration in the MVR screen. Figure 37 Advanced Application > Multicast > Multicast Setting > MVR: Group Configuration ES-315/ES-315-F User's Guide 81