ZyXEL G-220 User Guide - Page 56
WPA/WPA2, Table 7,
View all ZyXEL G-220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ZyXEL G-220 v2 User's Guide The following table describes the labels in this screen. Table 7 Station Mode: Security Setting: WPA-PSK/WPA2-PSK LABEL Encryption Type Pre-Shared Key Back Next Exit DESCRIPTION The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses a simple common password, instead of user-specific credentials. Select the encryption type (TKIP or AES) for data encryption. Refer to Section 3.2.3.3 on page 38 for more information. Type a pre-shared key (same as the AP or peer device) of between 8 and 63 casesensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. Click Back to go to the Site Survey screen to select and connect to another network. Click Next to confirm your selections and advance to the Confirm Save screen. Refer to Section 4.3.2 on page 59. Click Exit to return to the Site Survey screen without saving. 4.3.1.3 WPA/WPA2 Note: At the time of writing this section is less functional on Windows Vista. Please see Section 4.6 on page 69 for more information on how to configure the security settings. Figure 32 Station Mode: Security Settings: WPA/WPA2 56 Chapter 4 Wireless Station Mode Configuration