ZyXEL P-128 User Guide - Page 111
LAN-to-LAN Server Application
View all ZyXEL P-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Prestige 128IMH ISDN Modem/ Router/Hub 8.2 LAN-to-LAN Server Application Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access for the workstations on a remote network. For your Prestige to be set up as a LAN-toLAN server, you need to configure the Default Dial-In Setup to set the operational parameters for incoming calls. Additionally, you must create a remote node for the router on the remote Remote Network LAN-to-LAN Server Local Network Prestige Prestige network (see Chapter 5 - Remote Node Configuration). An example of your Prestige being used as a LAN-to-LAN server is shown below. Figure 8-2 Example of a LAN-to-LAN Server Application Dial-I n Server Configuration 8-3
Prestige
128IMH
ISDN Modem/ Router/Hub
Dial-In Server Configuration
8-3
8.2
LAN-to-LAN Server Application
Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide
access for the workstations on a remote network.
For your Prestige to be set up as a LAN-to-
LAN server, you need to configure the Default Dial-In Setup to set the operational parameters
for incoming calls.
Additionally, you must create a remote node for the router on the remote
network (
see
Chapter 5 - Remote Node Configuration
).
An example of your Prestige being used as a LAN-to-LAN server is shown below.
Figure 8-2 Example of a LAN-to-LAN Server Application
Prestige
Prestige
Remote Network
Local Network
LAN-to-LAN
Server