ZyXEL P-128 User Guide - Page 81
Menu 11.2 - Remote Node PPP Options, Table 4-3 Remote Node PPP Options Menu Fields
View all ZyXEL P-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Prestige 128IMH ISDN Modem/ Router/Hub Figure 4-3 Menu 11.2 - Remote Node PPP Options The following table describes the Remote Node PPP Options Menu, and contains instructions on how to configure the PPP options fields. Field Table 4-3 Remote Node PPP Options Menu Fields Description Option Encapsulation Select the CISCO PPP only when this remote node is a Cisco machine; otherwise, select the Standard PPP. Standard PPP Compression Multiple Link Options: Turn on/off Stac Compression. The default for this field is Off. CISCO PPP On/Off (Default = Off) BOD Calculation Select the direction of the traffic you wish to use in determining when to add or subtract a link. The default for this field is Transmit or Receive. Default = Transmit or Receive Base Trans Rate Select the base data transfer rate for this remote node in Kbps. There are two choices for this field64 where only one channel is used or 128 where two channels are used as soon as a packet triggers a call 64/128 Max Trans Rate Target Utility (kbps) Enter the maximum data transfer rate allowed for this remote node. This parameter is in kilobits per second. There are two choices for this field- same as above. Enter the two thresholds separated by a [-] for subtracting and adding the second port. 64/128 Default=10 20 Remote Node Configuration 4-9