ZyXEL P-128 User Guide - Page 96
IPX Ethernet Setup
View all ZyXEL P-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Prestige 128IMH ISDN Modem/ Router/Hub 6.4 IPX Ethernet Setup From Menu 3 - Ethernet Setup, select option Novell IPX Setup to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in the figure below. Menu 3.3 - Novell IPX Ethernet Setup Seed Router= No Frame Type 802.2= Yes IPX Network #= N/A Frame Type 802.3= No IPX Network #= N/A Frame Type Ethernet II= No IPX Network #= N/A Frame Type SNAP= No IPX Network #= N/A Enter here to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup The following table describes the Novell IPX Ethernet Setup Menu. Field Seed Router Frame Type Table 6-1 Novell IPX Ethernet Setup Fields Description Determine if your Prestige is to act as a seed router. Enable/Disable the individual frame type. Remember to enable only the ones that are actually used on your network. IPX Network If your Prestige is a seed router, enter a unique network number for # each frame type enabled. Options Yes/No 802.2 802.3 Ethernet II SNAP 6-6 IPX Configuration