ZyXEL P-128 User Guide - Page 112

Prestige 128IMH ISDN Modem/ Router/Hub 8.3 Default Dial-In Setup This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming calls from both remote dial-in users, and remote nodes until authentication is completed. Once authentication is completed and if it matches a remote node, your Prestige will use parameters from that particular remote node. Menu 13 - Default Dial -in Setup Telco Options: CLID Authen= None PPP Options: Recv Authen= CHAP/PAP Compression= Yes Mutual Authen= No PAP Login= N/A PAP Password= N/A Multiple Link Options: Max Trans Rate= 128 Callback Budget Management: Allocated Budget(min)= Period(hr)= IP Address Supplied By: Dial-in User= Yes IP Pool= No IP Start Addr= N/A IP Count(1,2)= N/A IPX Net Num Supplied By: IPX Pool= No IPX Start Net Num= N/A IPX Count(2,16)= N/A Session Options: Edit Filter Sets= No Idle Timeout= 300 Press ENTER to CONFIRM or ESC to CANCEL: Press Space Bar to Toggle. Figure 8-3 Menu 13 - Default Dial-in Setup From the Main Menu, enter 13 to go to Menu 13 - Default Dial-in Setup. This section describes how to configure the protocol-independent fields in this menu. For the protocoldependent fields, refer to the appropriate chapters. The table below describes and contains information on how to configure each parameter in Menu 13 - Default Dial-in Setup. 8-4 Dial-In Server Configuration