ZyXEL P-128 User Guide - Page 98

Prestige 128IMH ISDN Modem/ Router/Hub 6.5.1 IPX Remote Node Setup Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 - Remote Node Profile. For the IPX-specific parameters in Menu 11.3 - Remote Node Network Layer Options, follow the instructions below. If you want the Prestige to receive incoming calls, you must also configure the default dial-in parameters in Menu 13. To edit Menu 11.3 - Remote Node Network Layer Options shown below, follow these steps: Step 1. In Menu 11.1, make sure IPX is among the protocols in the Route field. (The Route field should display Route = IPX or Route = IP + IPX.) Step 2. Move the cursor to the Edit IP/IPX/Bridge field, then press the space bar to select Yes and press [Enter] to open Menu 11.3 - Network Layer Options. Menu 11.3 - Remote Node Network Layer Options IP Options: Rem IP Addr: Rem Subnet Mask= N/A My WAN Addr= N/A Single User Account= N/A Server IP Addr= N/A Metric= N/A Private= N/A RIP Direction= N/A Version= N/A IPX Options: Dial-On-Query= No Rem LAN Net #= 00000000 My WAN Net #= 00000000 Hop Count= 1 Tick Count= 2 W/D Spoofing(min)= 3 SAP/RIP Timeout(min)= 3 Bridge Options: Dial-On-Broadcast= N/A Ethernet Addr Timeout(min)= N/A Enter here to CONFIRM or ESC to CANCEL: Figure 6-5 Menu 11.3 - Remote Node Novell IPX Options 6-8 IPX Configuration