ZyXEL P-128 User Guide - Page 80

Editing PPP Options

Get ZyXEL P-128 PDF manuals and user guides View all ZyXEL P-128 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Prestige 128IMH ISDN Modem/ Router/Hub When bandwidth on demand is enabled, a second channel will be brought up if traffic on the initial channel is higher than the high Target Utility number for longer than the specified Add Persist value. Similarly, the second channel will be dropped if the traffic level falls below the low Target Utility number for longer than the Subtract Persist value. The Target Utility specifies the line utilization range at which you want the Prestige to add or subtract bandwidth. The range is 30 to 64 kbps (kilobits per second). The parameters are separated by a '-'. For example, '30-60' means the add threshold is 30 kbps and subtract threshold is 60 kbps. The Prestige performs bandwidth on demand only if it initiates the call. Addition and subtraction are based on the value set in the BOD Calculation field. If this field is set to Transmit or Receive, then traffic in either direction will be inclu ded to determine if a link should be added or dropped. Transmit will only use outgoing traffic to make this determination and Receive will only use incoming traffic to make this determination. If, after making the call to bring up a second channel, the second channel does not succeed in joining the Multilink Protocol bundle (because the remote device does not recognize the second call as coming from the same device), the Prestige will hang up the second call and continue with the first channel alone. The BOD configuration is through Menu 11.2 - Remote Node PPP Options. 4.1.6 Editing PPP Options To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 - Remote Node Profile, and use the space bar to select Yes. Press Enter to open Menu 11.2, as shown below. Menu 11.2 - Remote Node PPP Options Encapsulation= Standard PPP Compression= No Multiple Link Options: BOD Calculation= Transmit or Receive Base Trans Rate(Kbps)= 64 Max Trans Rate(Kbps)= 64 Target Utility(Kbps)= 32 -48 Add Persist(sec)= 5 Subtract Persist(sec)= 5 Press ENTER to CONFIRM or ESC to CANCEL: 4-8 Press Space Bar to Toggle. Remote Node Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
Prestige
128IMH ISDN Modem/ Router/Hub
4-8
Remote Node Configuration
When bandwidth on demand is enabled, a second channel will be brought up if traffic on the
initial channel is higher than the high
Target Utility
number for longer than the specified
Add
Persist
value. Similarly, the second channel will be dropped if the traffic level falls below the low
Target Utility
number for longer than the
Subtract Persist
value.
The
Target Utility
specifies the line utilization range at which you want the Prestige to add or
subtract bandwidth. The range is 30 to 64 kbps (kilobits per second). The parameters are
separated by a ‘-’. For example, ‘30-60’ means the add threshold is 30 kbps and subtract threshold
is 60 kbps. The Prestige performs bandwidth on demand only if it initiates the call. Addition and
subtraction are based on the value set in the
BOD Calculation
field. If this field is set to
Transmit or Receive
, then traffic in either direction will be inclu ded to determine if a link
should be added or dropped.
Transmit
will only use outgoing traffic to make this determination
and
Receive
will only use incoming traffic to make this determination.
If, after making the call to bring up a second channel, the second channel does not succeed in
joining the Multilink Protocol bundle (because the remote device does not recognize the second
call as coming from the same device), the Prestige will hang up the second call and continue with
the first channel alone.
The BOD configuration is through Menu 11.2 - Remote Node PPP Options.
4.1.6 Editing PPP Options
To edit the remote node PPP Options, move the cursor to the
Edit PPP Options
field in Menu
11.1 - Remote Node Profile, and use the space bar to select
Yes
.
Press
Enter
to open Menu
11.2, as shown below.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)= 32-48
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.