ZyXEL P-128 User Guide - Page 54
How to use call waiting
View all ZyXEL P-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Prestige 128IMH ISDN Modem/ Router/Hub ISDN Call Waiting This allows you to place a call on hold while you answer another incoming call on the same telephone (directory) number. By default call waiting is disabled on both telephone ports, but can be enabled on either port from Menu 2.1 How to use call waiting The Call Waiting feature on your ISDN line works in exactly the same way it does on a regular analog line. After hearing a call waiting indicator tone, press and immediately release the flash button on your telephone. This puts your current call on hold and answers the incoming call. Calling Line Indication Menu 2.1 - ISDN Advanced Setup Phone 1 Call Waiting= Disable Phone 2 Call Waiting= Disable Calling Line Indication= Enable Press ENTER to Confirm or ESC to Cancel: Figure 2-10 ISDN Advanced Setup The Calling Line Indication, or Caller ID, governs whether the other party can see your number when you call. If set to Enable, the Prestige sends the caller ID and the party you call can see your number, otherwise, the caller ID is blocked. When you are finished, press ENTER at the message: 'Press ENTER to confirm', the Prestige uses the information that you entered to initialize the ISDN line. It should be noted that whenever the switch type is changed, the ISDN initialization takes slightly longer. At this point, the Prestige asks if you wish to test your ISDN. If you select Yes, the Prestige will perform a loop-back test to check the ISDN line. If the loop-back test fails, please note the error message that you receive and take the appropriate troubleshooting action. Setup LoopBack Test... Dialing to 40000// ... Sending and Receiving Data ... 2-18 Hardware Installation and Setup