ZyXEL P-128 User Guide - Page 114

Prestige 128IMH ISDN Modem/ Router/Hub does not apply to CHAP authentication. PAP Password This field is applicable only if the Mutual Authen. Field is set to Yes. Enter in the PAP password to be used to respond to the far end's authentication request. This field does not apply to CHAP authentication. Multiple Link Options: Max Trans Rate Callback Budget Management: Enter the maximum data transfer rate between your Prestige and the remote dial-in user. 64 - At most, one B channel is used. 128 - A maximum of two channels can be used.. When the Prestige calls back to the remote dial-in user, the maximum data transfer rate is always 64. 64/128 Allocated Budget (min) This field sets the budget callback time for all the remote dial-in users. The default for this field is 0 for no budget control. Default = 0 Period (hr) This field sets the time interval to reset the above callback budget control. IP Address Supplied By: Dial-in User If set to Yes, the Prestige will allow a remote host to specify its own IP address. If set to No, the remote host must use the IP address assigned by your Prestige from the IP pool, configured below. This is to prevent the remote host from using an invalid IP address and potentially disrupting the whole network. (Default = Yes) Yes/No IP Pool This field tells your Prestige to provide the rem ote host with an IP address from the pool. This field is required if Dial-In IP Address Supplied By: Dial-in User is set to No. You can configure this field even if Dial-in User is set to Yes, in which case your Prestige will accept the IP address if the remote peer specifies one; otherwise, an IP address is assigned from the pool. Yes/No (Default = No) IP Pool: IP Start Addr This field is applicable only if you selected Yes in the Dial-In IP Address Supplied By: IP Pool field. The IP pool contains contiguous IP addresses and this field specifies the first one in the pool. 8-6 Dial-In Server Configuration