ZyXEL P-128 User Guide - Page 41

Prestige 128IMH ISDN Modem/ Router/Hub 2.4 Power On Your Prestige At this point, you should have connected the console port, the ISDN BRI port, the Ethernet port and the power port to the appropriate devices or lines. You can now apply power to the Prestige by flipping the power switch to on (I is ON, O is OFF). Step 1. Initial Screen When you power on your Prestige, it performs several internal tests as well as line initialization. After the initialization, the Prestige asks you to press Enter to continue, as shown. Copyright (c) 1994 - 1998 ZyXEL Communications Corp. ethernet address: 00:a0:c5:98:23:12 Resetting ISDN firmware.(2) ZyXEL Prestige DSS1: V 099 Figure 2-3 Power-On Display Step 2. Entering Password The login screen appears after you press Enter, prompting you to enter the password, as shown below. For your first login, enter the default password 1234. As you type the password, the screen displays an (X) for each character you type. Please note that if there is no activity for longer than 5 minutes after you log in, your Prestige will automatically log you out and will display a blank screen. If you see a blank screen, press [Enter] to bring up the login screen again. Enter Password : XXXX Hardware Installation and Setup 2-5