ZyXEL P-128 User Guide - Page 76

Prestige 128IMH ISDN Modem/ Router/Hub Incoming: Incoming: Incoming: Outgoing: Outgoing: Outgoing: Outgoing: Rem Node Enter the password used when this remote node calls Password your Prestige. Rem CLID This field is applicable only if Call Direction is either Both or Incoming. Otherwise, an N/A appears in the field. This is the Calling Line ID (the telephone number of the calling party) of this remote node. If you enable the CLID Authen field in Menu 13 - Default Dial In, your Prestige will check the CLID in the incoming call against the CLIDs in the database. If no match is found and CLID Authen is Required, the call will be dropped. Callback This field is applicable only if Call Direction is Both. Otherwise, an N/A appears in the field. This field determines whether or not your Prestige will call back after receiving a call from this remote node. If this option is enabled, your Prestige will disconnect the initial call from this node and call it back at the Outgoing Primary Phone Number (see below). My Login Name This is a required field [?] if Call Direction is either Both or Outgoing. Enter the login name for your Prestige when it calls this remote node. My Password This is a required field [?] if Call Direction is either Both or Outgoing. Enter the password for your Prestige when it calls this remote node. Authen This field sets the authentication protocol used for outgoing calls. Options for this field are: l CHAP/PAP - Your Prestige will accept either CHAP or PAP when requested by this remote node. l CHAP - accept CHAP only. l PAP - accept PAP only. Pri(mary) Your Prestige always calls this remote node using the Sec(ondary Primary Phone number first for a dial-up line. ) Phone Enable Disable CHAP/PAP CHAP PAP 4-4 Remote Node Configuration