ZyXEL P-128 User Guide - Page 63
Follow the instructions in the following table to con TCP/IP parameters for the Ethernet, port
View all ZyXEL P-128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Prestige 128IMH ISDN Modem/ Router/Hub Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port. Field Table 3-2 TCP/IP Ethernet Setup Menu Fields Description Example TCP/IP Setup IP Address Enter the IP address of your Prestige in dotted decimal notation 192.168.1.1 (default) IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the Prestige 255.255.255.0 RIP Direction Press the space bar to select the RIP direction from Both/In Only/Out Only. Both (default) Version Press the space bar to select the RIP version from RIP-1/RIP2B/RIP-2M. RIP-1 (default) When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to cancel. Internet Access 3-7