ZyXEL P-128 User Guide - Page 24

Prestige 128IMH ISDN Modem/ Router/Hub If you have an ISDN line installed and working, you can reference the following sections to insure that your line is set up properly to allow all the features of your Prestige to operate. To order a new ISDN line, do the following: 1. Contact your local telephone company's ISDN Ordering Center to find out what type of ISDN service is available and the switch type. 2. Provide your telephone company with the line provisioning information for that switch type, which can be found at Chapter 15 of this manual. This insures proper operation of all of the Prestige's features with the ISDN line. 3. When the telephone company installs your ISDN line, please be sure to obtain and write down the following information for future use: • ISDN switch type • ISDN telephone number(s) Completing the Setup Information Worksheet Before you continue, locate the worksheet at Chapter 15 . This information worksheet has been provided to help you collect the necessary information needed for setup and installation in the following chapters. Collecting General Setup Information The Prestige requires certain system information. You can obtain all the pertinent information from your network administrator. Record this information into the worksheet as it becomes available. This worksheet will later be referred to as you configure your Prestige. System Name - This is the name given to the Prestige for identification purposes. This name should be no more than 8 alphanumeric characters. Spaces are not allowed, but '-' and '_' are accepted. Route IP Field - For Internet access, you need to enable the Route IP Field. You have now collected all of the general setup information you need. Please make sure that you have entered all the values onto the worksheet before proceeding to the next section. xxiv Preface