ZyXEL P-2802HW-I1 User Guide - Page 111
OTIST Screen
View all ZyXEL P-2802HW-I1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Chapter 8 Wireless LAN The following table describes the labels in this screen. Table 35 Wireless LAN: Advanced LABEL DESCRIPTION Wireless Advanced Setup RTS/CTS Threshold Enter a value between 0 and 2432. Fragmentation It is the maximum data fragment size that can be sent. Enter a value between 256 Threshold and 2432. Preamble Select a preamble type from the drop-down list menu. Choices are Long, Short or Dynamic. The default setting is Long. See the appendix for more information. 802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to associate with the ZyXEL Device. Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to associate with the ZyXEL Device. Select Mixed to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL Device might be reduced. Back Click this to return to the previous screen without saving changes. Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to reload the previous configuration for this screen. 8.5 OTIST Screen Use this screen to set up and start OTIST on the ZyXEL Device in your wireless network. To open this screen, click Network > Wireless LAN > OTIST. Figure 55 Network > Wireless LAN > OTIST P-2802H(W)(L)-I Series User's Guide 111