ZyXEL P-2802HW-I1 User Guide - Page 124

Chapter 9 Network Address Translation (NAT) Screens The following table describes the fields in this screen. Table 41 Port Forwarding LABEL DESCRIPTION Default Server Setup Default Server In addition to the servers for specified services, NAT supports a default server. A default server receives packets from ports that are not specified in this screen. If you do not assign a Default Server IP address, the ZyXEL Device discards all packets received for ports that are not specified here or in the remote management setup. Port Forwarding Service Name Select a service from the drop-down list box. Server IP Address Enter the IP address of the server for the specified service. Add Click this button to add a rule to the table below. # This is the rule index number (read-only). Active This field indicates whether the rule is active or not. Clear the check box to disable the rule. Select the check box to enable it. Service Name This is a service's name. Start Port This is the first port number that identifies a service. End Port This is the last port number that identifies a service. Server IP Address This is the server's IP address. Modify Click the edit icon to go to the screen where you can edit the port forwarding rule. Click the delete icon to delete an existing port forwarding rule. Note that subsequent address mapping rules move up by one when you take this action. Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to return to the previous configuration. 9.5.1 Port Forwarding Rule Edit Use this screen to edit a port forwarding rule. Click the rule's edit icon in the Port Forwarding screen to display the screen shown next. Figure 67 Port Forwarding Rule Setup 124 P-2802H(W)(L)-I Series User's Guide