ZyXEL P-2802HW-I1 User Guide - Page 128
SIP ALG
View all ZyXEL P-2802HW-I1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Chapter 9 Network Address Translation (NAT) Screens 9.6.2 SIP ALG Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows SIP calls to pass through NAT by examining and translating IP addresses embedded in the data stream. When the ZyXEL Device registers with the SIP register server, the SIP ALG translates the ZyXEL Device's private IP address inside the SIP data stream to a public IP address. You do not need to use STUN or an outbound proxy if your ZyXEL Device is behind a SIP ALG. Use this screen to enable and disable the SIP (VoIP) ALG in the ZyXEL Device. To access this screen, click Network > NAT > ALG. Figure 70 Network > NAT > ALG Each field is described in the following table. Table 45 Network > NAT > ALG LABEL DESCRIPTION Enable SIP ALG Select this to make sure SIP (VoIP) works correctly with port-forwarding and address-mapping rules. Apply Click this to save your changes and to apply them to the ZyXEL Device. Reset Click this to return to previously saved configuration. 128 P-2802H(W)(L)-I Series User's Guide