ZyXEL P-2802HW-I1 User Guide - Page 95
Configuring Advanced LAN Setup
View all ZyXEL P-2802HW-I1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 LAN Setup Table 23 LAN IP (continued) LABEL DESCRIPTION Cancel Click Cancel to begin configuring this screen afresh. Advanced Setup Click this button to display the Advanced Setup screen and edit more details of your LAN setup. 7.4.1 Configuring Advanced LAN Setup Use this screen to edit your ZyXEL Device's RIP, multicast, any IP and Windows Networking settings. Click the Advanced Setup button in the LAN IP screen. The screen appears as shown. Figure 43 Advanced LAN Setup The following table describes the labels in this screen. Table 24 Advanced LAN Setup LABEL DESCRIPTION RIP & Multicast Setup RIP Direction Select the RIP direction from None, Both, In Only and Out Only. RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M. Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a multicast group. The ZyXEL Device supports both IGMP version 1 (IGMP-v1) and IGMP-v2. Select None to disable it. Any IP Setup Select the Active check box to enable the Any IP feature. This allows a computer to access the Internet without changing the network settings (such as IP address and subnet mask) of the computer, even when the IP addresses of the computer and the ZyXEL Device are not in the same subnet. Note: You must enable NAT/SUA to use the Any IP feature on the ZyXEL Device. When you disable the Any IP feature, only computers with dynamic IP addresses or static IP addresses in the same subnet as the ZyXEL Device's LAN IP address can connect to the ZyXEL Device or access the Internet through the ZyXEL Device. P-2802H(W)(L)-I Series User's Guide 95