Brother International HL 4040CN Users Manual - English - Page 177
Thin Paper, Paper, Examples of poor print quality, Recommendation, b
UPC - 012502617785
View all Brother International HL 4040CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Troubleshooting Examples of poor print quality White lines or ribbing down the page on duplex print ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz. Recommendation Choose Thin Paper mode in the printer driver and re-send the print job. If the problem is not solved after printing a few pages, follow these steps: a Open the back cover. b Pull down the two grey levers, one on the left-hand side and one on the right-hand side, to position B as shown in the illustration below. Note Position B is only for duplex printing with recycled paper when the temperature and humidity are low. 7 c Close the back cover. d Choose Plain Paper mode in the printer driver and re-send the print job. e If the problem is not solved after printing a few pages, choose Thin Paper mode in the printer driver and re-send the print job. Note When you have finished printing, open the back cover and reset the two gray levers back to the original position. Use thicker paper than you are now using. 168