Brother International HL 4040CN Users Manual - English - Page 79

Control Panel Reprint 4 If you want to reprint a document that has just been printed, press Reprint. You can reprint when the printer is in the Ready state. (For details, see Reprinting documents on page 73.) + or - button 4 Moving through menus on the LCD 4 4 Pressing the + or - button when the printer is in the Ready state, takes it offline and the LCD will show the control panel menu. Press to scroll through the menus and options. Press the button until you see the setting you want. Entering numbers 4 You can enter numbers in two ways. You can press the + or - button to move up or down one number at a time, or you can hold down the + or - button to move faster. When you see the number you want, press OK. Back 4 Pressing Back when the printer is in the Ready state takes it offline, and the LCD will show the control panel menu. Pressing Back allows you to return to the previous level from the current menu level. Back also allows you to choose the previous digit while setting numbers. When you choose a setting and it does not have an asterisk (OK was not pressed), Back allows you to return to the previous menu level with the original setting unchanged. OK 4 Pressing OK when the printer is in the Ready state takes it offline, and the LCD will show the control panel menu. Pressing OK allows you to choose the displayed menu or option. After changing a setting, the LCD shows Accepted and then the printer returns to the previous menu level. Note The options you have chosen are shown with an asterisk at the end of the display. Since the asterisk shows what you have chosen, you can easily see the current settings as you look through the LCD. 70