Brother International HL 4040CN Users Manual - English - Page 93

Control Panel LAN for HL-4070CDW users (continued) Submenu 1 Submenu 2 Menu Selections Options Descriptions WLAN Status Status Signal SSID (Shows SSID [uses a maximum of 32 digits and characters 0-9, a-z and A-Z in ASCII values]) Comm. Mode AD-HOC*/Infrastructure Shows the current Communication Mode. Set to Restores wired network settings of the internal print server to default. 4 Default WLAN Enable On/Off* Chooses Ethernet link mode. Factory Reset Restores all network settings of the internal print server to default. The default settings are shown in Bold with an asterisk. 1 On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the machine's control panel. Reset Menu Display Shows Reset Printer Factory Reset Description Resets the printer and restores all printer settings (including command settings) to settings you have previously made with the control panel buttons. Resets the printer and restores the printer settings (including command settings) to the default settings. Color Correction Submenu ColorCalibration Menu Selections Calibrate Reset Auto Regist. Registration Frequency Options Low/Medium*/High/Off The default settings are shown in Bold with an asterisk. Descriptions Carry out calibration to revise the colors. Set the calibration parameters back to the default settings. Adjusts the print position of each color automatically. Sets the interval time you want to carry out the auto registration. 84