Brother International Innov-ís 2800D Users Manual - English - Page 12

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Needle and Presser Foot Section Embroidery Unit a Buttonhole lever Lower the buttonhole lever when sewing buttonholes and bar tacks. b Presser foot holder The presser foot is attached to the presser foot holder. c Presser foot holder screw Use the presser foot holder screw to hold the presser foot holder in place. d Presser foot The presser foot consistently applies pressure to the fabric as it is sewn. Attach the appropriate presser foot for the selected stitch. e Feed dogs The feed dogs feed the fabric in the sewing direction. f Bobbin cover Open the bobbin cover to insert the bobbin. g Needle plate cover Remove the needle plate cover to clean the bobbin case and race. h Needle plate The needle plate is marked with guides to help sew straight seams. i Needle bar thread guide Pass the upper thread through the needle bar thread guide. j Needle clamp screw Use the needle clamp screw to hold the needle in place. a Carriage The carriage moves the embroidery frame automatically when embroidering. b Release button (located under the embroidery unit) Press the release button to remove the embroidery unit. c Embroidery unit connector Insert the embroidery unit connector into the connection port to attach the embroidery unit. d Embroidery frame holder Attach the embroidery frame to the embroidery frame holder to hold the frame in place. e Frame-securing lever Press down the frame-securing lever to secure the embroidery frame. CAUTION • After the embroidery frame is set in the frame holder, be sure the frame-securing lever is correctly lowered. 10