Brother International Innov-ís 2800D Users Manual - English - Page 152
Automatic Thread Cutting End Color
View all Brother International Innov-ís 2800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
ADJUSTMENTS DURING THE EMBROIDERY PROCESS ■ If the Upper Thread Is Too Tight The upper thread is too tight when the bobbin thread is visible from the right side of the fabric. ■ If the Upper Thread Is Too Loose The upper thread is too loose when there are loose thread locks or when loops appear on the right side of the fabric. Right side of fabric a Press . Wrong side of fabric Right side of fabric Wrong side of fabric a Press . b Press in the tension display. * Each press of the key increases the value and tightens the upper thread tension. b Press in the tension display. * Each press of the key decreases the value and weakens the upper thread tension. c Press . c Press . Automatic Thread Cutting (End Color Trim) If the automatic thread cutting setting is selected, the machine will automatically cut the thread at the end of each color step sewn. To cancel the setting, press , and then press again so that it appears as . 150