Brother International Innov-ís 2800D Users Manual - English - Page 196

CARE AND MAINTENANCE CARE AND MAINTENANCE CAUTION • Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may result. Cleaning the LCD g Grasp the bobbin case, and then pull it out. If the surface of the LCD is dirty, lightly wipe it with a soft dry cloth. Do not use organic solvents or detergents. Cleaning the Machine Casing If the surface of the machine is dirty, dampen a cloth with a neutral detergent, wring it out firmly, and then wipe the surface. Then, wipe again with a dry cloth. Cleaning the Race If dust or dirt collects in the race or bobbin case, the machine will not run well, and the bobbin thread detection function may not operate. Keep the machine clean for best results. a Press the "Needle Position" button to raise the needle. b Lower the presser foot. c Turn off the machine. d Remove the needle (see page 35) and the presser foot holder (see page 68). e Remove the flat bed attachment or the embroidery unit if either is attached. f Grasp both sides of the needle plate cover, and then slide it toward you. a a Bobbin case h Use the included cleaning brush or a vacuum cleaner to remove any lint and dust from the race and its surrounding area. a b a Cleaning brush b Race Note Do not apply oil to the race. a a Needle plate cover 194