Brother International Innov-ís 2800D Users Manual - English - Page 135

ATTACHING THE EMBROIDERY FRAME ATTACHING THE EMBROIDERY FRAME Note Before attaching the embroidery frame, set the bobbin. a Press the "Presser Foot Lifter" button to raise the presser foot. e Lower the frame-securing lever so that it is level with the frame to secure the embroidery frame in the embroidery frame holder. b Raise the frame-securing lever. a CAUTION • If the frame-securing lever is not lowered, the embroidery pattern may not sew out correctly or the presser foot may strike the embroidery frame and cause injury. a Frame-securing lever f After the embroidery frame is attached, press the "Presser Foot Lifter" button again to 5 c Align the embroidery frame guide with the right edge of the embroidery frame holder. lower the presser foot. a ■ Removing the Embroidery Frame Embroidery a Press the "Presser Foot Lifter" button to raise the presser foot. b Raise the frame-securing lever. b a Embroidery frame holder b Embroidery frame guide d Slide the embroidery frame into the holder, making sure that on the embroidery frame aligns with on the holder. c Pull off the embroidery frame toward you. a a Arrows 133