Brother International Innov-ís 2800D Users Manual - English - Page 186

DESIGNING A STITCH DESIGNING A STITCH By using the MY CUSTOM STITCH™ function, you can register stitches you have created yourself. Memo • Stitches that you create with MY CUSTOM STITCH™ can be a maximum of 7 mm (approx. 9/32 inch) wide and 37 mm (approx. 1-1/3 inches) long. • Stitches can be designed more easily with MY CUSTOM STITCH™ if you first draw the stitch on the included grid sheet. a Draw the stitch design on the grid sheet (part code SA507, X81277-050). b Decide the spacing of the stitch. * By adjusting the spacing of a stitch, you can create various patterns with one stitch. Memo Simplify the design so that it can be sewn as a continuous line. For a more attractive stitch, close the design by intersecting lines. c Place points where the pattern intersects with the grid, and connect all the points with a line. If the design is to be repeated and linked, the start point and end point of the design should be at the same height. d Determine the x and y coordinates of each of the marked points. 184 Memo This will determine the stitch design that will be sewn.