Brother International Innov-ís 2800D Users Manual - English - Page 93
presser foot touches the edge of the zipper
View all Brother International Innov-ís 2800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
h Close the zipper, turn the fabric over so that the surface faces up, and then baste the other side of the zipper to the fabric. a c b d a Front of garment (wrong side of fabric) b Back of garment (surface of fabric) c Basting d Front of garment (surface of fabric) i Remove the presser foot, and then attach the pin on the left side of the zipper foot to the presser foot holder. a c b a Right side b Left side c Needle drop point j Set the fabric so that the left edge of the presser foot touches the edge of the zipper teeth. k Sew reverse stitches at the top of the zipper, then continue sewing. l Stop sewing about 50 mm (approx. 2 inches) from the edge of the fabric, leave the needle in the fabric, and remove the basting stitches. m Open the zipper and sew the rest of the seam. a b c d a Basting b Reverse stitching c 7 to 10 mm (approx. 1/4 to 3/8 inch) d 50 mm (approx. 2 inches) SEWING THE STITCHES 3 91 Utility Stitches