Brother International Innov-ís 2800D Users Manual - English - Page 30

LOWER/UPPER THREADING f After guiding the thread completely through the groove, pull it toward you to cut it with the cutter. c While lightly holding the upper thread, press the "Needle Position" button twice to lower, then raise the needle. a a Cutter g Attach the bobbin cover by inserting the tab in the lower-left corner of the bobbin cover, then lightly press down on the right side of the cover until it snaps into place. d Gently pull the upper thread to pull up the bobbin thread. a a Tab Pulling Up the Bobbin Thread There may be some sewing applications where you may want to pull up the bobbin thread, for example, when making gathers or with free-motion quilting. Follow the procedure described below to pull up the bobbin thread. Memo Thread the upper thread before pulling up the bobbin thread. For details, see "Upper Threading" on page 29. a Follow steps a through d from the previous section to insert the bobbin into the bobbin case. b Guide the bobbin thread through the groove, following the arrow in the illustration. Note • Do not cut the thread with the cutter. • Do not attach the bobbin cover. → A loop of the bobbin thread comes out from the hole in the needle plate. e Pull out about 100 mm (approx. 3-4 inches) of the bobbin thread, and then pass it under the presser foot toward the rear of the machine, making it even with the upper thread. a b a Upper thread b Bobbin thread f Attach the bobbin cover. 28