Canon imageCLASS D420 imageCLASS D480 Basic Operation Guide - Page 167
Starting the Remote UI
View all Canon imageCLASS D420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Starting the Remote UI Starting the Remote UI To start the Remote UI, follow the procedure described below. Before you start the Remote UI, perform the following: - Select in located in the , and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator. (See "Confirming IPv4 Address Settings and Checking IPv4 Connection," or "Confirming IPv6 Address Settings," in "Network Settings," in the e-Manual.) - Set to in . (See "Setting the Use of HTTP," in "Network Settings," in the e-Manual.) 1 Prepare the Network. Set up the machine for use in a network, then connect the machine and the computer to your network router or a hub. For details, see "Set Up Network Connection," in the Starter Guide, or "Set Up Network Connection," in "Set Up the Machine," in the e- Manual. 2 Start the web browser. 3 Enter the IP address of the machine in [Address] or [Location], then press [Enter] on the keyboard. For details on how to check the IP address, see "Confirming IPv4 Address Settings and Checking IPv4 Connection," or "Confirming IPv6 Address Settings," in "Network Settings," in the e-Manual. The Remote UI screen appears. 4 Enter the required data. The required data differ depending on the authentication mode you are using. ■ For default settings: ① Select [Administrator Mode] or [End-User Mode]. Settings from a PC 9-4