Canon imageCLASS D420 imageCLASS D480 Basic Operation Guide - Page 41

Before Using the Machine Timer Settings Timer Settings The timer settings enables you to set the Sleep Mode and the Daylight Saving Time. Setting the Sleep Mode If the machine remains idle for a certain period of time, it automatically enters the Sleep mode. The default settings are as follows: - : ON - : 5MIN. 1 Press [Menu]. 2 Press [ ] or [ ] to select , then press [OK]. MENU 8 TIMER SETTINGS 3 Press [ ] or [ ] to select , then press [OK]. AUTO SLEEP ON 4 Press [ ] or [ ] to select , then press [OK]. AUTO SLEEP ON 5 Press [ ] or [ ] to select the desired interval, then press [OK]. AUTO SLEEP TIME 5MIN. - You can set the interval from 3 to 30 minutes (in one-minute increments). - You can also enter values using - [numeric keys]. 6 Press [Stop/Reset] to return to the standby mode. - [Energy Saver] lights green when the machine enters the Sleep mode. - To enter the Sleep mode manually, press [Energy Saver] on the operation panel. - The machine will not enter the Sleep mode when: • the machine is in operation • the Processing/Data indicator lights or blinks • a message appears on the display and the Error indicator blinks • paper is loaded in the multi-purpose tray • a paper jam occurs in the machine • the handset of the external telephone is off the hook - The machine will leave the Sleep mode when: • you press [Energy Saver] on the operation panel • a fax is received • the handset of the external telephone is off the hook • a print job is sent from a computer, and the print is started 1-14