Casio WK-6500 User Guide - Page 69

System Track and Track 01 through 16 Common Recording Content ■ Recording Start • Note settings • Rhythm selection • Tempo setting • Scale setting • The mixer settings below - All part parameters from A04 through A07 and B01 through B16 (Excluding part on/off) - Part parameters from A09 through A16: part on/off, coarse tune, fine tune, scale enable, DSP line - DSP parameters: volume, pan, reverb send • Effect settings • Accomp volume ■ During Recording • Keyboard play • Pitch bender operations • Pedal operations System Track Recording Content ■ Recording Start • Tones for the UPPER 1, UPPER 2, and LOWER parts • Layer and split on/off • Split point setting • Octave shift for the UPPER 1, UPPER 2, and LOWER parts • The function menu item settings below (page E-97) - Arpeggiator hold, arpeggiator speed, arpeggiator part • Auto harmonize or arpeggiator on/off and type • Synchro standby (Normal, Variation, Intro) • Music preset (Only when using EASY REC.) ■ During Recording • Rhythm selection • Tempo setting • All of the items under "Recording Start" above, except for the function menu item settings and split point setting • Chord play using the chord keyboard • The rhythm controller operations below L-13 (INTRO), L-14 (NORMAL/FILL-IN), L-15 (VARIATION/FILL-IN), and L-16 (SYNCHRO/ENDING) button operations • Settings recalled from registration memory • Settings recalled using One Touch Preset Using the Song Sequencer • Due to the way song parts are configured, settings configured by a recalled registration are applied to different numbered parts than they were assigned to when the setup was saved, as shown below. Parts when registration Parts when registration is setup is saved recalled for song recording UPPER 1 part (A01) UPPER 1 part (A05) UPPER 2 part (A02) UPPER 2 part (A06) LOWER part (A03) LOWER part (A07) Auto Harmonize tone part (A04) Auto Harmonize tone part (A04) For details about the configuration of song parts, see "Songs, tracks, and parts" (page E-66). • The moment you call up a registration setup or One Touch Preset while recording, the setting information registered with the registration setup or One Touch Preset is recorded to the system track. The registration setup or One Touch Preset itself is not recorded. Track 01 through 16 Recording Content ■ Recording Start • Part tone selection for the track ■ During Recording • Part tone selection for the track • The mixer settings below - All part parameters from B01 through B16 (except part on/off) Panel Settings and Header Settings Before starting recording with the song sequencer, you need to select the tone and rhythm, and also configure other settings such as tempo, mixer settings, etc. These are called "panel settings" because they are configured using the Digital Keyboard's control panel. When you start recording, panel settings are stored in the header of the song. Settings in the header of a song are called "header settings". • The "Recording Start" settings under "System Track and Track 01 through 16 Common Recording Content" (page E-67), "System Track Recording Content" (page E-67) and "Track 01 through 16 Recording Content (page E-67) are stored as header settings. • Only header settings can be changed after song recording is complete. For details, see "Using Panel Record to Rewrite Song Header Settings" (page E-72). E-67