Casio WK-6500 User Guide - Page 97
Input Menu Setting Items - 76 key
View all Casio WK-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Using the Song Sequencer 5. Use buttons R-1 (5) to R-4 (•) and buttons R-7 (6) to R-10 (,) to specify the length of the note you want to input. • For information about how to specify note lengths, see step 4 under "To insert an event" (page E-88). • You can perform the following operations during step input to insert ties and rests. To do this: Tie the note at the current cursor position with the note event immediately before it Perform this operation: 1. At the current cursor position, specify the length of the note you want to tie with the immediately preceding note event. 2. Press the R-11(.) button. • This adds the length of the note you specified in step 1 to the length of the note immediately preceding it. At this time, the cursor will move forward by the timing of the added amount. 62 AB 6 2 2 A Preceding note event B Current cursor position A C C Cursor position after process Insert a rest before the current cursor position 1. At the current cursor position, specify a note that is the same length as the rest you want to insert. 2. Press the R-5 (REST) button. • The cursor will move forward by the length of the note you specified in step 1. 62 B 6 2 B Current cursor position C C Cursor position after process 6. Press the keyboard key that corresponds to the note you want to input. • The note is input as soon as you press the keyboard key, and the cursor will move by the length you specified in step 5 to the next measure:beat:tick. From there you can input the next note, if you want. 7. Repeat steps 5 and 6 to input the notes you want. • If you want to input a series of notes of the same length, skip step 5 and perform step 6 only. 8. After inputting all of the notes you want, press the R-15 (EXIT) or R-17 (t, y) button. • This returns to the event editor screen. Input Menu Setting Items Pressing the C-13 (MENU) button while holding down the R-13 (FUNCTION) button during step input will display the input menu. The following explains the meanings and setting ranges of the input menu items. The settings marked with an asterisk (*) in the "Setting Range" column are initial defaults. Item name GateRate (Gate Rate) Velocity (Velocity) SysTrack (System Track) Description Setting Range Specifies the gate rate as a percentage of the actually input gate length for the length (gate length) of the note event or chord event that was specified using buttons R-1 (5) through R-4 (•) and R-7 (6) through R-10 (,). Specifying a GateRate of 080% and inputting a quarter note (96 ticks), for example, will result in a GATE setting of 00:76 (96 X 0.8 = 76.8, cut off to 76). 001% to 080%* to 100% Specifies the velocity value of an input note event or chord event. Specifying KeyOn, 001 to 100* to 127 "KeyOn" inputs a velocity value in accordance with applied key pressure. Selects either note event input or chord event input when inputting to the system track. note*, Chord E-95