Cisco 6509 Installation Guide - Page 224

1300 W AC-Input and DC-Input Power Supplies Appendix A Power Supply Specifications 1300 W Power Supply Specifications Table A-7 lists the specifications for the 1300 W AC-input and DC-input power supplies. Table A-7 1300 W AC-Input and DC-Input Power Supplies Specifications Specification AC-input type AC-input voltage AC-input current kVA rating Branch circuit requirement (AC-input) Description Autoranging input with power factor correction (PFC). Note Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components. 100 to 240 VAC (±10% for full range) • 16 A @ 100 VAC • 8 A @ 240 VAC 1625 kVA Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America-15 A or 20 A • For International-Circuits sized to local and national codes • All Catalyst 6500 series AC-input power supplies require single-phase source AC. • All AC power supply inputs are fully isolated. - Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B. - Source AC can be out of phase between AC inputs on power supplies that are equipped with multiple AC inputs, which means that power cord 1 can be plugged into phase A and power cord 2 can be plugged into phase B. A-14 Catalyst 6500 Series Switches Installation Guide OL-5781-04