Cisco 6509 Installation Guide - Page 74

Catalyst 6513 Switch Chapter 1 Product Overview Catalyst 6513 Switch Table 1-19 lists the features of the Catalyst 6513 switch chassis. Table 1-20 lists the specifications of the Catalyst 6513 switch chassis. Figure 1-13 shows a view of the Catalyst 6513 switch chassis. Table 1-19 Catalyst 6513 Switch Features Feature Chassis Supervisor Engines Description • Thirteen horizontal slots. Slots are numbered from (1) top to (13) bottom. • Supports Supervisor Engine 2, Supervisor Engine 32, and Supervisor Engine 720. - Supervisor Engine 2 is installed in slot 1 and slot 2. - Supervisor Engine 1A is not supported. - Supervisor Engine 32 and Supervisor Engine 720 are installed in slot 7 and slot 8. - Supervisor Engine 32 and Supervisor Engine 720 require that you install the high-speed fan tray. You must also install a 2500 W or higher capacity power supply in the chassis to power the high-speed fan tray. - Supervisor Engine 720 has built-in switching fabric. Switch Fabric Modules are not supported by Supervisor Engine 720 and cannot be installed in the same chassis. • The uplink ports are fully functional on all redundant supervisor engine models when they are in standby mode. Modules Note Redundant supervisor engines must be configured identically. • Supports up to 12 Catalyst 6500 series modules. • WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be installed in slot 7 or slot 8. • WS-X6748-SFP, WS-X6748-GE-TX, and WS-X6704-10GE modules are not supported in slots 2-8; they are supported in slots 9-13. - Slots 1-8 support a single fabric channel; slots 9-13 support dual fabric channels. • Some Catalyst 6500 series modules may: - Not be supported - Require that you install a Supervisor Engine 720 - Have chassis slot restrictions - Require a specific software release level Check your software release notes for specific information. 1-50 Catalyst 6500 Series Switches Installation Guide OL-5781-04