Cisco 6509 Installation Guide - Page 58

Catalyst 6509-E Switch Chapter 1 Product Overview Catalyst 6509-E Switch The Catalyst 6509-E switch is a 9-slot horizontal chassis. Table 1-13 lists the features of the Catalyst 6509-E switch chassis. Table 1-14 lists the specifications of the Catalyst 6509-E switch chassis. Figure 1-10 shows the Catalyst 6509-E switch. Table 1-13 Catalyst 6509-E Switch Features Feature Chassis Supervisor Engines Description • Nine horizontal slots. Slots are numbered from (1) top to (9) bottom. • Supports Supervisor Engine 1, Supervisor Engine 2, Supervisor Engine 32, and Supervisor Engine 720. - Supervisor Engine 1 and Supervisor Engine 2 are installed in slot 1 and slot 2. - Supervisor Engine 32 and Supervisor Engine 720 are installed in slot 5 and slot 6. - Supervisor Engine 720 has built-in switching fabric. Switch Fabric Modules are not supported by Supervisor Engine 720 and cannot be installed in the same chassis. • The uplink ports are fully functional on all redundant supervisor engine models when they are in standby mode. Modules Backplane Bandwidth Clock and VTT Modules Note Redundant supervisor engines must be configured identically. • Supports up to eight Catalyst 6500 series modules. • WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be installed in slot 5 or slot 6. • Some Catalyst 6500 series modules may: - Not be supported - Require that you install a Supervisor Engine 720 - Have chassis slot restrictions - Require a specific software release level Check your software release notes for specific information. • 32 GBps shared bus. • 256 GBps switch fabric. • 720 GBps switch fabric. • Two replaceable clock modules (CLK-7600=) provide clocking signals to the EOBC channel and the switching bus. • Three replaceable voltage termination (VTT) modules (WS-C6K-VTT-E=) provide reference voltage for bus signals. 1-34 Catalyst 6500 Series Switches Installation Guide OL-5781-04