Cisco WS-C3560-8PC-S Installation Guide - Page 84

Step 1, Use this procedure to create an initial configuration for the switch

Get Cisco WS-C3560-8PC-S - Catalyst 3560-8PC Switch PDF manuals and user guides
UPC - 882658120404
View all Cisco WS-C3560-8PC-S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

Assigning Switch Information Chapter 2 Installing and Starting Up the Switch Default gateway (router Enable secret password Use this procedure to create an initial configuration for the switch: Note Be sure the rollover cable is connecting a PC serial port to the switch console port. The data characteristics are 9600 baud, 8 data bits, 1 stop bit, and no parity. Use the supplied rollover cable and DB-9 adapter to connect a PC to the switch console port. You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see the "Cable and Adapter Specifications" section on page B-4. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Enter Y at the prompt: Continue with configuration dialog? [yes/no]: y If this prompt does not appear, enter enable, and press Return. Enter setup, and press Return to restart the setup program. Enter the switch IP address, and press Return: Enter IP address: ip_address Enter the subnet mask (IP netmask) address, and press Return: Enter IP netmask: ip_netmask Enter Y to specify a default gateway (router): Would you like to enter a default gateway address? [yes]: y Enter the IP address of the default gateway, and press Return: IP address of the default gateway: ip_address Enter a host name for the switch, and press Return: 2-26 Catalyst 3500 Series XL Hardware Installation Guide 78-6456-04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Chapter 2
Installing and Starting Up the Switch
Assigning Switch Information
2-26
Catalyst 3500 Series XL Hardware Installation Guide
78-6456-04
Use this procedure to create an initial configuration for the switch
:
Note
Be sure the rollover cable is connecting a PC serial port to the switch
console port. The data characteristics are 9600 baud, 8 data bits,
1 stop bit, and no parity. Use the supplied rollover cable and DB-9
adapter to connect a PC to the switch console port. You need to
provide a RJ-45-to-DB-25 female DTE adapter if you want to
connect the switch console port to a terminal. You can order a kit
(part number ACS-DSBUASYN=) containing that adapter from
Cisco. For console port and adapter pinout information, see the
“Cable and Adapter Specifications” section on page B-4
.
Step 1
Enter
Y
at the prompt:
Continue with configuration dialog? [yes/no]:
y
If this prompt does not appear, enter
enable
, and press
Return
. Enter
setup
,
and
press
Return
to restart the setup program.
Step 2
Enter the switch IP address, and press
Return
:
Enter IP address:
ip_address
Step 3
Enter the subnet mask (IP netmask) address, and press
Return
:
Enter IP netmask:
ip_netmask
Step 4
Enter
Y
to specify a default gateway (router):
Would you like to enter a default gateway address? [yes]:
y
Step 5
Enter the IP address of the default gateway, and press
Return
:
IP address of the default gateway:
ip_address
Step 6
Enter a host name for the switch, and press
Return
:
Default gateway (router)
___________.___________.___________._________
Enable secret password
___________________________________________