Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 122
To run TEST, Quick Check Diagnostics
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
4-28 Compaq Professional Workstation AP550 Maintenance and Service Guide To run TEST: 1. Restart the workstation from the diagnostics diskette you have created. 2. Press Enter to bypass the welcome screen. 3. Select Computer Checkup (TEST), then press Enter. 4. Select the option to view the device list. A list of installed hardware devices is displayed. 5. Verify that TEST has correctly detected the devices installed. If the list is correct, select OK. The test option menu is displayed again. If the list is incorrect, be sure that any new devices are installed properly. NOTE: This utility may not detect non-Compaq devices. 6. Select one of the following from the TEST option menu: Y Quick Check Diagnostics Y Automatic Diagnostics Y Prompted Diagnostics CAUTION: If attended testing is selected, the test itself may result in data loss. IMPORTANT: When you run the TEST utility, be sure to record any error message numbers. 7. Follow the instructions on the screen as the diagnostic tests are run on the devices. When the testing is complete, the TEST option menu is displayed again. 8. To exit TEST, press Esc until you see the Exit option, then press Enter.