Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 79
Speaker, Disconnect the speaker cable from the system board.
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
3-46 Compaq Professional Workstation AP550 Maintenance and Service Guide Speaker To remove the speaker (158267-001): 1. Perform the steps in the "Service Preparations" section as previously shown. CAUTION: Before removing the workstation access panel, ensure that the workstation is turned off, all cables are disconnected from the back of the workstation, and the power cord is disconnected from the grounded AC outlet. 2. Remove the workstation access panel. 3. Disconnect the speaker cable from the system board. 4. Remove the four screws that secure the speaker to the side of the drive cage 1, and then remove the speaker 2. 1 2 Figure 3-41. Removing the speaker To reinstall the speaker, reverse the above procedure.
3-46
Compaq Professional Workstation AP550 Maintenance and Service Guide
Speaker
To remove the speaker (158267-001):
1.
Perform the steps in the “Service Preparations” section as previously shown.
CAUTION:
Before removing the workstation access panel, ensure that the workstation is
turned off, all cables are disconnected from the back of the workstation, and the power cord is
disconnected from the grounded AC outlet.
2.
Remove the workstation access panel.
3.
Disconnect the speaker cable from the system board.
4.
Remove the four screws that secure the speaker to the side of the drive cage
1
, and then
remove the speaker
2
.
2
1
Figure 3-41.
Removing the speaker
To reinstall the speaker, reverse the above procedure.