Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 154
Mass Storage
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Jumper and Switch Information 6-3 Mass Storage The Compaq Professional Workstation AP550 supports Ultra3 SCSI, Wide Ultra2 SCSI, and Ultra ATA hard drives. The specifications included below are the standard hard drive configurations shipped with the workstation. For specifications on other hard drives, refer to the Service Quick Reference Guide. 9.1-GB Ultra3 SCSI Hard Drive Drive Size: 9.1 GB Model: DDRS-39130 Bit 3 Bit 1 S Bit 2 Bit 0 Pin 1 J2 J2 P SCSI ID Settings SCSI ID 0 1 2 3 4 5 6 Bit 2 Bit 1 Key Jumper NOT Installed Jumper Installed Bit 0 Pin 1 Printed Circuit Board J2 Default Settings Signal Description Jumper S Start Unit Command Enabled P Parity Enabled W Write Protect Disabled n/a X Synch Data Transfer Enabled n/a Key Jumper NOT Installed Jumper Installed Pin 1 J1B SCSI NOTE: This drive is intended for non-pluggable applications only. Migration to a Hot-Pluggable Drive Tray is not supported. NOTES: POWER 1. All jumper and switch settings are shown in the factory default setting, including those not labeled. 2. Termination is disabled/removed. Figure 6-2. Locating the jumper positions for the 9.1-GB hard drive (DDRS-39130)