Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 85
then lift the board up and out of the chassis, Tilt the rear of the board up
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
3-52 Compaq Professional Workstation AP550 Maintenance and Service Guide 8. Remove the retaining screws that secure the system board to the chassis 1. 9. Slide the board 1/2-inch toward the front of the chassis to clear the I/O panel connectors 2. 10. Tilt the rear of the board up 3, then lift the board up and out of the chassis 4. 1 1 1 4 3 2 Figure 3-45. Removing the system board from the chassis To install a new system board, reverse the above procedure. CAUTION: Damage to the system board could result if all the power cables are not properly reconnected to the system board. NOTE: When installing the system board, properly align the board in the chassis by inserting the screw nearest the power supply first.
3-52
Compaq Professional Workstation AP550 Maintenance and Service Guide
8.
Remove the retaining screws that secure the system board to the chassis
1
.
9.
Slide the board 1/2-inch toward the front of the chassis to clear the I/O panel
connectors
2
.
10.
Tilt the rear of the board up
3
, then lift the board up and out of the chassis
4
.
1
2
1
1
3
4
Figure 3-45.
Removing the system board from the chassis
To install a new system board, reverse the above procedure.
CAUTION:
Damage to the system board could result if all the power cables are not properly
reconnected to the system board.
NOTE:
When installing the system board, properly align the board in the chassis by inserting the screw
nearest the power supply first.