Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 61
Card Guide
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3-28 Compaq Professional Workstation AP550 Maintenance and Service Guide Card Guide To remove the card guide: 1. Perform the steps in the "Service Preparations" section as previously shown. CAUTION: Before removing the workstation access panel, ensure that the workstation is turned off, all cables are disconnected from the back of the workstation, and the power cord is disconnected from the grounded AC outlet. 2. Remove the workstation access panel. 3. Remove any full-length expansion boards. 4. Push down on the two tabs on the top of the card guide 1. 5. While holding the tabs down, remove the card guide from the chassis 2. 2 1 Figure 3-27. Removing the card guide To replace the card guide, reverse the above procedure.
3-28
Compaq Professional Workstation AP550 Maintenance and Service Guide
Card Guide
To remove the card guide:
1.
Perform the steps in the “Service Preparations” section as previously shown.
CAUTION:
Before removing the workstation access panel, ensure that the workstation is
turned off, all cables are disconnected from the back of the workstation, and the power cord is
disconnected from the grounded AC outlet.
2.
Remove the workstation access panel.
3.
Remove any full-length expansion boards.
4.
Push down on the two tabs on the top of the card guide
1
.
5.
While holding the tabs down, remove the card guide from the chassis
2
.
2
1
Figure 3-27.
Removing the card guide
To replace the card guide, reverse the above procedure.