Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 59
Connect external cables to the installed board, if needed.
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3-26 Compaq Professional Workstation AP550 Maintenance and Service Guide Refer to the following illustration to install a PCI expansion board. 1. Slide the expansion board into the expansion slot and press it firmly into place. Figure 3-25. Installing an expansion board IMPORTANT: When you install an expansion board, press firmly on the board so that the whole connector seats properly in the expansion board slot. NOTE: If you are installing a full-length PCI expansion board, make sure the board is engaged with the card guide. 2. Replace the screw at the side of the expansion slot. 3. Replace the workstation access panel. 4. Connect external cables to the installed board, if needed. 5. Plug the network cable back into the system. Plug the power cord back into the grounded AC outlet. Reconnect external devices.