Compaq AP550 Compaq Professional Workstation AP550 Maintenance & Service G - Page 48
Remove the screws that secure the hard drive to the drive adapter
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Removal and Replacement Procedures 3-15 7. To remove the bracket brace from the top of the drive adapter, squeeze in on both sides of the brace 1, then rotate the brace up and out 2. 8. Remove the drive bezel 3. 9. Remove the screws that secure the hard drive to the drive adapter 4. 10. Remove the hard drive from the drive adapter 5. 1 1 2 4 5 3 4 Figure 3-15. Removing a 3.5-inch drive from the 5.25-inch drive adapter To replace the drive, reverse the above procedure. IMPORTANT: The primary 3.5-inch diskette drive should only be installed into bay 3. NOTE: If you are installing a second 3.5-inch diskette drive into bay 1 or 2 for the first time, you must use a special adapter bracket. (See Chapter 1 for the spare part number.) If you are installing a 3.5-inch diskette drive into bay 3, you must use a special adapter bracket. (See Chapter 1 for the spare part number.)