Compaq Armada E700 Armada E700 - Page 126
Inserting the Short Screws in the Processor Board
View all Compaq Armada E700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
22. Install the two short screws removed in Step 20 into the upper/left and lower/right holes on the processor board (Figure 5-54). These screws are temporarily used to secure the processor board and processor spacers to the system board. Figure 5-54. Inserting the Short Screws in the Processor Board Remove and Replacement Procedures 5-59
Remove and Replacement Procedures
5-59
22.
Install the two short screws removed in Step 20 into the upper/left and lower/right
holes on the processor board (Figure 5-54). These screws are temporarily used to
secure the processor board and processor spacers to the system board.
Figure 5-54.
Inserting the Short Screws in the Processor Board