Compaq Armada E700 Armada E700 - Page 86
Removing a Hard Drive from the MultiBay, - weight
View all Compaq Armada E700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Removing a Hard Drive from the MultiBay Before removing a hard drive, back up all information on the hard drive. 1. Save all work, exit all applications, and shut down the computer. 2. Tilt the computer at an angle 1 so the bottom of the computer is accessible (Figure 5-17). 3. If a 12.7-mm Armada MultiBay hard drive adapter is being removed from the top MultiBay, slide the rear MultiBay release latch 2 toward the front of the computer. 4. Grasp the hard drive assembly using the recess 4 beneath the MultiBay and remove the hard drive assembly from the computer. 5. If a 17-mm Dual-MultiBay Hard Drive Adapter is being removed, or if a 12.7-mm Armada MultiBay hard drive adapter is being removed from the bottom MultiBay, slide the front MultiBay release latch 3 toward the back of the computer. 6. Grasp the hard drive assembly using the recess 4 beneath the MultiBay and remove the hard drive assembly from the computer. Figure 5-17. Removing a Hard Drive Assembly from the MultiBay If you are not inserting another drive or a battery pack into the MultiBay, insert the MultiBay weight saver included with the computer. Removal and Replacement Procedures 5-19