Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 102
SCSI A Bus, Determining Cabling Needs, SCSI A Cable
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6-4 Compaq ProLiant 6400R Setup and Installation Guide to the external SCSI connection on the rear of the server. The other bus is designated the SCSI A bus. SCSI A Bus The SCSI A bus connects to SCSI hard drive slots 0 through 3. SCSI A Cable Figure 6-3. The SCSI A bus Determining Cabling Needs To determine the SCSI cables needed for your application: 1. Determine the internal cabling needs. 2. Identify the SCSI hardware device for the Wide Ultra2 SCSI hard drive only. 3. Follow the interconnect instructions. For the latest information on SCSI adapters and Smart Array controllers and configurations supported by the Compaq ProLiant 6400R server, refer to the Compaq website: http://www.compaq.com
6-4
Compaq ProLiant 6400R Setup and Installation Guide
to the external SCSI connection on the rear of the server. The other bus is
designated the SCSI A bus.
SCSI A Bus
The SCSI A bus connects to SCSI hard drive slots 0 through 3.
SCSI A Cable
Figure 6-3.
The SCSI A bus
Determining Cabling Needs
To determine the SCSI cables needed for your application:
1.
Determine the internal cabling needs.
2.
Identify the SCSI hardware device for the Wide Ultra2 SCSI hard drive
only.
3.
Follow the interconnect instructions.
For the latest information on SCSI adapters and Smart Array controllers and
configurations supported by the Compaq ProLiant 6400R server, refer to the
Compaq website: